- دستگاه تخصصی برش پلاسما با سرعت بالا مخصوص برش فلزات
CNC Cutting Machine model : Avid Special
Technical Specifications for Plasma/oxyfuel Cutting Machine model : Avid Special
|
|
Cnc controller
|
SmartCNC
Advanced IPC Rugged Fan-Less , IP61 |
File format
|
DXF , G-Code |
Supported processes with tools for switching
|
Plasma Cutting
OxyFuel Cutting *Marking , *Drilling |
Longitudinal motion course
|
6200mm up to 24000mm |
Crossing Course
|
2100mm up to 5400mm |
The number of automatic plasma head
|
1 up to 2 Cutting Head |
Number of oxyfuel head
|
1 up to 4 cutting head |
Makring Head
|
1 Makring Head |
Drilling Head
|
1 Drilling Head |
Triggering system
|
Digital AC Servo + Planetary GearBox
Dual Drive for longitudinal Axis Delta Servo System Apex-Dynamic Low-Backlash Gear
|
Longitudinal motion guide
|
Precision Linear Guide TBI Taiwan |
Crossing Guide
|
Precision Linear Guide TBI Taiwan |
Speed of movement
|
15.000 mm /min
Up to 24.000 mm/min* |
Longitudinal and transverse impeller system
|
Precision Helical Rack & Pinion
Made in Germany
|
Lateral / transverse actuation system | Zero-Backlash (0.0 mm) |
Longitudinal and transverse movement accuracy | 0.1 mm |
Plasma height control system | THC with Collision Protection |
Initial ignition system | IHS |
oxy Fuel Height Control System
|
CNC Controlled THC Sensor |
Maximum Final Tolerance of the Production Piece | +- 0.2 mm |
input voltage | 210 ~ 230V Single-Phase |
Power consumption current (without unit of plasma) | Average 4A – Peak 15A |
Permissible ambient working temperature | 0 .. 40 degree |
THC plasma cutting | |
head width | |
The suffering of plasma cutting | |
Standard equipment | Initial automatic spacing at first cutting, rising at the end of the cutting
Head of plasma rise at the end of the cutting and when moving fast, avoid collisions with cut pieces while moving fast Turbo protection against 3-D mechanical collision |
Automatic sheet level detection | 150mm |
The accuracy of the height control system | 0.5mm up to 160mm
(depend on Plasma Unit) |
Controls the height of the plasma | CNC –Controlled THC
Automatic Corner Detection Automatic Pierce – Cut Height Automatic Torch Raise Stop on Collision |
Automatic movement course | 200mm |
Maximum plasma cutting speed | Max 8,000 mm/min |
Oxy fuel THC | |
head width | 150mm |
Oxyfuel system | Koike Japan
B.O.C nozzle Parker Valves |
Standard equipment | Initial automatic spacing at first cutting, rising at the end of the cutting
Head of plasma rise at the end of the cutting and when moving fast, avoid collisions with cut pieces while moving fast Turbo protection against 3-D mechanical collision |
Automatic movement course | 200mm |
Torch installation course | 200mm |
Maximum oxyfuel cutting thickness | 300mm |
Possibilities | Automatic Torch UP after Cutting
Automatic Height Adjust Automatic Torch Down before Cutting |
oxy Fuel Height Control | CNC Controlled THC |
List of some customers who use Avid Special
- Production of CNG tanks “bhene h sanat esfhan “
- Boiler manufacturer ” Arvin bokhar “
- Agricultural implements ” khavar kombain “
- Manufacturer of bread baking machines ” sanae pokht mashad “