Plasma and oxyfuel cutting machine CNC plasma cutting machine AVID model is designed for precision cutting of plasma and oxy fuel method.
The body structure of the device is similar to the shuffle model with high precision in dynamic motion conditions
The drive motors are parallel.
Technical Specifications PDF CNC Plasma Cutting Machine AVID
PDF Catalog CNC Plasma Cutting Machine AVID
The Avid CNC Plasma Cutting Machine are designed for accurate cutting of metal sheets by plasma and oxyfuel. The rugged, interconnected, machined coil allows high speed access with high cutting accuracy.
The Smart CNC control system provides accurate and uniform cutting speeds and acceleration at corners and contours. The precision of the motor above the machine is provided by installing the motor in two directions (parallel elongation), along with the ZERO-BACKLASH Rack & Pinion actuator system and Linear-Guide precision linear guides. This system allows you to install a variety of manual and automatic plasma models. Plasma units can be installed on the device with the following models.
Technical Specifications of Plasma / oxyfuel Model AVID Model | |
Control system | H3 System Advanced IPC
Rugged Fan-Less , IP61 |
cutting file formats | DXF , G-Code |
Supported Processes | Plasma Cutting , OxyFuel Cutting, Marking , Drilling |
Longitudinal motion | 3010 mm |
Transverse movement | 1600 mm |
Torch Altitude Movement | 200 mm |
Speed of movement | 30000 mm /min |
Longitudinal and transverse impeller system | Rack & Pinion |
Lateral / transverse actuation system | Zero-Backlash (0.0 mm) |
Plasma Height Control System * | Fine-THC |
Initial ignition system | IHS |
The accuracy of the height control system | 0.1 mm |
Air Humidity Control System ** | CAP Sensor |
Longitudinal and transverse movement accuracy | 0.1mm |
The final tolerance of the production piece | +- 0.2 mm |
Movement speed control of the turret height | 9000mm/min |
input voltage | 210/230V Single-Phase |
Power consumption current (without unit of plasma) | Average 4A – Peak 10A |
Machine weight | ~ 1600 Kg |
Exterior dimensions of the machine (transport) | 3500 (L) x 2100(W) x 2000(H) mm |
Permissible ambient working temperature | 40 …0degree |
Maximum Plasma Cutting Thickness | 45mm up to 160 mm* |
Maximum oxyfuel cutting thickness | 250mm |